Install the Askmeghana App (CAO Admissions) For Free. Questions are Answered Faster On the App. Click Here to Download from Play Store
This is very simple to reset emachine bios password simple open cabinet of cpu then remove litheum battery of emachie. restart the machiche with battery the password will reset. Enjoy..
Do you want to reset bios password?The easiest way is move battery from motherboard. Or move the motherboard jumper over two pins then start the computer. If you don't have the jumper, remove the CMOS battery for a couple minutes then put it back in.And other ways can be found out based on your computer brand. But for Emachine, there are no other available ways.
If you happen to forgot windows os password, you can enter safe mode (F8 when booting up) to reset windows password when you did not remember user account password, but when you forgot admin passwords, there's no way to change it, you have to use a software program to recover administrator password. Yesterday evening, I forgot my Windows administrator password. At last, I used Windows Password Seeker to reset the Windows password successfully. It's worth an attempt. http://www.passwordseeker.com
If you have forgotten your BIOS or system password, there are no software tricks or magical gimmicks that will get the password cleared. Laptops are different in that they are designed to not work with “backdoors” etc. for security reasons. There is one true way that works most of the time and that is hardware. The Cmos (RTC) battery that is mounted on the motherboard in most cases holds the key, if your motherboard has the battery that is connected to the motherboard by using a two wire socket that plugs into the MOBO, then here is the procedure. On the motherboard where the battery plugs into, you will see two pins sticking straight up, these engage the plug on the battery side. These two pins have to be “shorted” and then the motherboard powered up for approx. 30 seconds, then power down the system and replace the Cmos battery and reboot. Only reboot with the AC adapter plugged in, not the main laptop battery. Your password problem should be cleared up. The best way to “short” the pins is get another cmos battery and cut the wires from the battery part, bare the ends and twist together, this will short the pins. Make sure you tape the connection good on the jumper you just made….don’t want to touch anything else with powered up bare wires. Good luck. If the battery is the disc type and sits in a horizontal socket on the motherboard, then it is a little more difficult to perform but the theory is still good, the positive and negative have to be shorted and the same procedure done. In most cases, just removing the cmos battery does not work in laptops, this is because there is extra security needed because of their portability.